• All our products have an unconditional guarantee against faulty workmanship and defective parts.
• All products are engineered with 100% plastic. No metal components. Polyethylene Piping can be buried below soil or left on top of the garden, year round with low maintenance.
• Easy installation with step-by-step instructions included with each kit
• Expandable system with interchangeable components which can be purchased individually.
• Not all available accessories are shown. For additional product information please contact us.

	Name	Use for
Rigid Risers
	200mm	- can be cut down to accommodate all sizes of plants
Stakes
	Riser Pipe Stake 13mm	- used to secure tubing to soil as well as keeping Riser up right
Spray Heads
	180 Spray Jets	- sprays water 1.2m out and side ways
	360 Spray Jets	- sprays water 1.2m out in all directions
	Micro Misters	- used in small spaces, very fine mist great for ferns
	Micro Sprinkler	- great for covering large areas will spray 3.2m all directions
	Adjustable Micro Sprinkler 180 degrees	- used for covering large areas will spray 3.2m out and side ways. Has valve on side to regulate amount of water wanted. Can turn off water completely
	Adjustable Micro Sprinkler 360 degrees	- used for covering large areas will spray 3.2m out in all directions - has valve on side to regulate amount of water wanted - can turn off water completely
	Aqua Stakes	- spray head and stake in one adjustable spray head used for small pots or hanging baskets
	Aqua Crosses and Tees	- used to split one line into three with Aqua Tubing 4mm - used to split one line into two with Aqua Tubing 4mm
	Tee*	- used to split one line into two with Lo Pol Tubing
	Elbow*	- used for corners or running lines upwards with Lo Pol Tubing
	End Plugs*	- used for ending a waterline
	Joiner*	- used to join one Lo Pol tubing line to another
	Ratchet Clips	- used to secure Lo Pol Tubing to Elbows, Tees etc…)
	Goof Plugs	- used to seal a hole or when replacing a spray head opening
	In Line Filter*	- to keep spray heads clear of debris
	Pressure Reducer	- reduces the volume of water going into system. Can regulate the depth and radius of spray heads
	Punch Spanner	- used to pierce Lo Pol Tubing and secure spray heads to Rigid Risers
	Threaded Joiners	- used to secure Rigid Riser into Lo Pol tubing. Also used to add one Rigid Riser to another for extra height
	Lo - Pol Tubing	- tubing can be left above ground or buried
	Aqua Tubing	- used with Aqua Stakes with Aqua Shuttle system
	In Line Valves*	- used to separate waterlines into different sections. Ideal if low pressure is a problem
	Back-Back Nut Aqua Shuttle	- used to join one Aqua Shuttle to another
	Poly to Hose Connector*	- used to Secure Lo Pol Tubing to Water bib
	Tap Adapter	- used in conjunction with Poly to Hose connector

*parts include ratchet clips

PPI Products are imported and distributed
by Water Works Garden Products.
Established in 1979. PPI Corporation Ltd.
is renowned as one of the largest privately owned manufactures of irrigation products
in Australia and New Zealand.

©Water Works Garden Products 2003
Site Design by: Digital Chaos